CSE-SVR-4U
|
Maximum Read: 500MB/sec, Maximum Write: 450MB/sec, Controller: SandForce SF-2200, 3 Years Warranty.
|
||||||||||||
Bundle deal available on this product:
Description:
Any way you look at it, solid state drives are faster than HDDs, so why not get the most bang-for-your-buck? OCZ Solid 3 SSDs are designed to provide a superior combination of value and performance, implementing the cutting-edge SATA 6Gbps interface to deliver speed that significantly improves your overall computing experience.In addition to enhanced performance, a Solid 3 upgrade promotes cooler, quieter, and more energy efficient conditions compared to traditional mechanical hard drives leading to a longer battery life. With no moving parts, SSDs also provide peace of mind with their superior durability and reliability.
Max Read: up to 500MB/s
Max Write: up to 450MB/s
Random Write 4KB (Aligned): 20,000 IOPS
- Available in 60GB and 120GB Capacities
- MLC NAND Flash
- Interface: SATA 6Gbps / Backwards Compatible 3Gbps
- Native TRIM support
- Seek Time: .1ms
- Slim 2.5" Design
- 99.8 x 69.63 x 9.3mm
- Lightweight: 77g
- Operating Temp: 0°C ~ 55°C
- Storage Temp: -45°C ~ 85°C
- Low Power Consumption: 2.7W Active, 1.5W Idle
- Shock Resistant up to 1500G
- RAID Support
- Compatible with Windows 7, Vista, XP 32-bit/64-bit, Mac OSX, Linux
- MTBF: 2 million hours
- 3-Year Warranty
Warranty Information:
| Manufacturer | ocz storage solutions |
| Warranty Type | Manufacturer via Aria |
| Manufacturer Website | http://www.ocztechnology.com/ |
| Manufacturer Phone | 0208 892 5454 |
| Warranty Period (yrs) | 3 |
Comments, Questions & Reviews:
Boot Issue by MPD
Further to an earlier question. There are issues if you use the SSD to boot. People are getting the BSOD and system hangs. Also the BIOS does not see the drive when you re-boot so there can be a lengthy procedure to get it to see the SSD drive again. I know as it has happened to me (and is still) and there are dozens in the same boat on the OCZ forum.
Coincidentally, I have a very similar motherboard to the earlier questioner, an Asus P8Z68.
MPD
Boot Problems by Boot Problems
On first installation this drive seems great but as soon as 15 minutes of idle, power saving options or sleep mode is activated the system will hang and the BIOS will refuse to see the drive. There is much discussion on this on OCZtechnology.com web site and forum.
Before I came across this web site I had many hours of fun re-installing Windows 7, unplugging my other drives, reconfiguring the BIOS boot, resetting the motherboard CMOS, switching off the computer (solution seems to be to switch the computer off at the mains for 15+minutes then switch back on go into BIOS, rset Boot to see OCZ Solid and then it will re-start - until the next time).
OCZ have been using geeks to help them debug this problem. Upgrading to the latest firmware helps some but not me.
So onto the question. Aria, do you know of a fix? If not can I get a refund and swap to a manufacturer that actually works?
If there isnt a solution then I'll be writing a very negative review next.
Do all SSDs have similar issues?
MPD
Many many SSDs have varying degrees of success with different systems - it is one of the two primary issues preventing SSDs from taking over completely (the other being price) and tends to be as much down to manufacturer support and firmware as it is individual hardware configuration.
Unfortunatly, I can help you here - you need to contact our Customer Service team on [email protected] or 0844 9998999 who should be able to assist you with this matter.
compatibility by kamran
hi
i have hp envy 15 1060ea .can u plz tell me if this product works with my laptop.if yes what speed thanks
As long as your laptop has a SATA data connection then this should be fine. Speeds will vary on what data you are transferring.
Requirements by Vultima
Hi I am looking into buying this SSD, however I have a few questions
1. My Mobo is only capable of 3GB/s and this states 6GB/s, is there any capability issues, if not, what other issues are there, how would this effect the read and write capabilities of it?
2. Does this come with some sort of bracket so it can fit into a 3.5" bay?
This SATA III (6Gb/s) will work fine in a SATA II port as they are made backwards compatible.
As for the bracket, this does not come with one, you will need Qc: 44222.
slight issue by Isaac
Bought one of these 2 months ago, i keep getting random BSODs then when i restart the drive is not set to my primary boot drive or is undetected until i turn it off, disconnect it, reboot it, turn it off, reconnect it
what should i do?
This is a known issue - try updating the firmware. If this doesn't help, then please contact [email protected] or 0844 999 8999 who will be able to assist you with this problem.
