Zalman CNPS9500-AT Intel (LGA775)(*LGA1366 requires kit)
Aero Flower Cooler LGA775
Description:Compatible with Intel's Dual Core Pentium, Pentium4, and Celeron D for Socket 775. Low-noise 92mm PWM Control fan for automatic control of the fan’s RPM according to CPU temperature. Optimized heatsink layout composed of pure copper for maximum heatsink efficiency. Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes with just three. 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance. Maintains minimum RPM even when Duty signal supplied by M/B is below 30%. Operates in silence by preventing extreme RPM during initial booting.
*to use this with LGA1366 CPU's please add the following kit
|Warranty Type||Aria Warranty Only|
|Manufacturer Phone||0906 47 00 309|
|Warranty Period (yrs)||1|
|Aria Warranty Only?||Yes|
Comments, Questions & Reviews:
peltier by karl
Do you think this would be suitable if i were using a peltier device between this heatsink and the cpu? i know i would need alot of cooling power for this and i think this fan would do the job, do you agree? also would the fan still clip onto the motherboard ok with the peltier device inbetween it and the cpu? I know about the condensation threat posed when using a peltier device and I will take the necessary precautions to stop it (pcb lacquer etc).
These can get rid of a lot of heat, so for what you need this and the bigger 9700 are ideal - because of the way these mount, it should be a simple job of replacing the screws with longer ones to accomodate your Peltier - let us know how you get on!
Thermal materiel by 3Shirts
Does this come with a thermal pad/paste or do I need to get some with it?
all the heatsinks we sell come with thermal goop
Question by Brian
Will this work okay on a socket 775 Quad core processor, specifically the Q6600 2.4Ghz?
Review by Pete
i installed a new system, from scratch, Nvidia nForce 680i SLI Pentium D 3.4Ghz Dual Core Corsair Extreme Ram 1G DVD/CD RW was runnin at 70 degrees plus the cpu, and 30 degrees for the system! caused loads of problems and crashes till i installed this beaut! dropped the cpu temp when being absolutely hammered to 50 degrees or less, and the system temp just a little over 20, if you want a good bit of kitt at a good price id really reccommend this! :D196 of 369 people rated this review as helpful
Review by Davec
I replaced the standard Intel fan with one of these beauties. It is simply superb - noise is reduced and the idle temperature of my processor (a Pentium D 940) has dropped 10 degrees in the same case! Highly recommended!202 of 434 people rated this review as helpful