Arctic Cooling Freezer 7 PRO Rev.2 CPU Air Cooler
Gallery(1 Image) - Click on picture to enlarge
Deal4Today |
92mm Fan PWM / 130W Support / Intel: 1366, 1150, 1155, 1156, 775 / AMD: FM1, FM2, AM3+, AM3, AM2+, AM2, 939 / Heatsink Height: 126.5mm.
|
||||||||||||
Description:
High Performance CPU Cooler for Intel and AMD
The Freezer 7 Pro Rev.2 is the upgraded version of the renowned Freezer 7 Pro. With the flexible mounting design, this version is compatible with the Intel Core i7, Core i5, as well as AMD Socket AM3. Featuring an ultra quiet 92mm fan and six heatpipes, the Freezer 7 Pro Rev.2 is one of the most efficient and quiet CPU coolers for power users.FEATURES:
The unique heatsink design consists of 42 fins which significantly increase the heat dissipation area to distribute massive amounts of heat faster and more efficiently. Featuring a 92mm PWM fan, six heatpipes and pre-applied ARCTIC MX-2 thermal paste, the Freezer 7 Pro Rev.2 offers performance far beyond stock coolers and achieves 130 watts cooling capacity, making it one of the most efficient CPU coolers available.
The Freezer 7 Pro Rev.2 is extremely quiet. Thanks to its low noise impeller and patented fan holder, the 92mm fan is almost inaudible. Controlled by a PWM signal, the fan runs at just the minimum necessary speed for lowest noise level and optimum cooling capacity. The Freezer 7 Pro Rev.2 generates only 0.8 Sone at 2,500 rpm which is much quieter than standard coolers and many other after market coolers.
The unique mounting system is very user-friendly. The whole installation can be done in a few minutes. This is a total peace of mind solution for both Intel and AMD users.
: Intel - 1366/1150/1155/1156/775
: AMD - FM1/FM2/AM3+/AM3/AM2+/AM2/939
SPECIFICATIONS:
: Heat Sink Dimensions - 104mm x 58mm x 126.5mm (LxWxH): Heat Sink Features: 6 Heatpipes & 42 Fins for efficient heat dissipation
: Fan Diameter - 92 mm
: Fan Speed - 900 - 2500 RPM (controlled by PWM)
: Air Flow - 45 CFM / 77 m3/h
: Max. Cooling Capacity - 130 Watts
: Bearing - Fluid Dynamic Bearing
: Pre-applied Thermal Paste: ARCTIC MX-2
: Weight - 520 g
Warranty Information:
| Manufacturer | arctic cooling |
| Warranty Type | Aria Warranty Only |
| Manufacturer Website | http://www.arctic-cooling.com/ |
| Manufacturer Phone | 00 41 325117221 |
| Warranty Period (yrs) | 1 |
| Aria Warranty Only? | Yes |
| Cooler Height - mm | 55 |
|---|
Comments, Questions & Reviews:
Question by Adam Marshall
It's hard to tell from the picture, but would this fan be a good replacement for a Intel E29477-002 Socket 1366 Heatsink & 4" Fan?
Hi Adam,
Providing it fits in your case it will be a good replacement for the stock cooler.
Will it fit by Maddie
I am unsure, being that the heatsink is 126.5mm (H) will this fit in a Zalman HD160 plus case? Also Am I able to Replace the fan?
- Thanks
According to Zalman's site you can install a CPU cooler with a maximum heatsink height of 150mm & yes you can replace the fan.
Great fan until by Ains
This is no doubt a good CPU cooler, good value for money especially for its cool temperatures against the stock performance. however 1/2 years down the line my fan stopped working one day without warning or misuse, so I would bare caution if you're looking for a long term cooler.
885 of 1757 people rated this review as helpfulWas this review helpful to you?
Comes with AMD3+ Mount? by Dexter
Hi, the CPU cooler mounting bracket that came with my motherboard has recently broken, and I'm having trouble finding a replacement. In the picture of this cooler, it seems to come with a mounting bracket. Is this bracket compatible with an AsRock 990FX Extreme3 motherboard? (From what I can tell, you no longer stock these boards)
Many thanks.
To be honest I'm not sure, It should be as the mobo you have is a AM3+ which this fan supports.
Compatability by mark
Under description it says it can be used on the LGA 1150 however under features point 6 it doesnt mention LGA 1150 compatabillity. So my question is can it be used on socket 1150?
Yes, 1150, 1155 and 1156 all have the same mounting.
