Noctua NT-H1 Performance Thermal Compound - 1.4ml
Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.
Description:Noctua's NT-H1 is a pro-grade TIM solution for enthusiasts who demand both exceptional performance and maximum ease of use: A hybrid compound of different micro-particles allows for minimum thermal resistance, excellent ease of use and outstanding long-term stability.
NT-H1 consists of a hybrid compound of different micro-particles, which has been specifically optimised for use in PC environments. Thanks to its extremely low thermal resistance as well as excellent pliability and spreadability, NT-H1 achieves outstanding results.
Maximum ease of use & efficient dosage
As NT-H1 spreads very well under pressure, there's no need to smear it over the heat-spreader. This reduces both the consumption of paste and the time spent on the installation process: Put one drop of NT-H1 onto the centre of your CPU, install the cooler and that's it!
Top-performance right from the start
NT-H1 reaches its full performance extremely fast and doesn't require a longer "burn-in" time.
Excellent long-term stability
NT-H1 doesn't contain any solvents or other substances with low flash point and provides excellent long-term stability. Due to the compound's exceptional curing, bleeding, dry-out und thermal cycling characteristics, NT-H1 can be used for several years without any problems.
Not electrically conductive, non-corroding
NT-H1 possesses a very low dielectric constant and a high dielectric strength. Therefore, there's no danger of short-circuits even in case of direct contact with components or conducting paths. Fully compatible with all materials commonly employed in PC environments, NT-H1 is suited for use with aluminium and copper coolers.
|Warranty Type||Direct with Manufacturer|
|Warranty Period (yrs)||2|
Comments, Questions & Reviews:
Good quality, minor hiccup... by Rob
As paste goes, its good gear, better apparent transfer than the last version of Arctic I was using - only one minor issue is that the syringe I had had a miniscule air bubble in it, so had a bit of a splurge moment. But otherwise, the application itself is good, the syringe plunger is tight and the cap screws over the top of the end, so minimal wasteage.395 of 857 people rated this review as helpful